What is ITAR?
ITAR (the International Traffic in Arms Regulations) is the U.S. export control regime for defense articles, defense services, and related technical data. Administered by the State Department's Directorate of Defense Trade Controls, it governs who may receive items and information on the U.S. Munitions List, including foreign persons working inside the United States.
Also known as International Traffic in Arms Regulations · 22 CFR Parts 120–130
What ITAR controls
ITAR implements the Arms Export Control Act and is codified at 22 CFR Parts 120 through 130. It is administered by the Directorate of Defense Trade Controls (DDTC) in the State Department's Bureau of Political-Military Affairs. It controls three things:
- Defense articles — items, and software, listed on the U.S. Munitions List, from firearms and munitions to aircraft, spacecraft, and military electronics.
- Technical data — information required to design, develop, produce, manufacture, assemble, operate, repair, test, maintain, or modify a defense article, such as drawings, specifications, test procedures, and manuals.
- Defense services — assistance, including training, given to foreign persons in the design, production, operation, repair, or maintenance of defense articles, and the furnishing of technical data to them.
Information that is in the public domain, general scientific and engineering principles commonly taught in schools, and basic marketing descriptions are not technical data. Almost everything an engineering or sustainment team works with day to day can be, though. Drawings, test procedures, maintenance, repair, and overhaul manuals, and the digital work instructions built from them for a controlled system are often technical data in their own right.
The U.S. Munitions List
The U.S. Munitions List (USML), in 22 CFR Part 121, sorts defense articles into 21 categories. They include firearms; launch vehicles, missiles, and rockets; military aircraft; military electronics; spacecraft; and a final category for articles not otherwise enumerated.
The first compliance question for any item is jurisdiction: is it on the USML and governed by ITAR, or is it subject to the Commerce Department's Export Administration Regulations instead? Export control reform starting in the early 2010s moved many less sensitive military parts and components from the USML to the Commerce Control List, so older classifications are worth revisiting. When jurisdiction is genuinely unclear, a company can ask DDTC for a formal commodity jurisdiction determination.
U.S. persons, foreign persons, and what counts as an export
ITAR's controls turn on the difference between U.S. persons and foreign persons. A U.S. person is a U.S. citizen, a lawful permanent resident, or a protected individual such as a refugee or asylee, along with companies incorporated in the United States. Everyone else is a foreign person, including foreign nationals working at a U.S. company.
An export under ITAR is much broader than a shipment crossing a border. It includes:
- Sending or taking a defense article out of the United States.
- Releasing technical data to a foreign person, whether abroad or inside the United States. A release to a foreign person in the U.S. is treated as an export to every country where that person holds or has held citizenship, or currently holds permanent residency.
- Performing a defense service for, or on behalf of, a foreign person.
That means a drawing emailed to a foreign-national colleague down the hall, a foreign-national administrator with access to a file share holding technical data, or a video call where a U.S. engineer talks a foreign technician through a repair can each be an export that needs authorization. The last example matters for remote expert assistance programs that span allied partners.
Registration and authorization
U.S. companies that manufacture or export defense articles or furnish defense services generally must register with DDTC under Part 122, even if they never ship anything abroad. Registration is a precondition for requesting export authorization; it does not authorize anything by itself. Exports are then made under licenses, such as the DSP-5 for permanent export of unclassified articles and technical data, under agreements, such as technical assistance agreements for defense services, or under specific exemptions. Violations can bring civil and criminal penalties and debarment from defense trade, and DDTC encourages voluntary disclosure of suspected violations.
ITAR vs. EAR
Most export-controlled items in the United States fall under one of two regimes:
| Aspect | ITAR | EAR |
|---|---|---|
| Agency | State Department, Directorate of Defense Trade Controls (DDTC) | Commerce Department, Bureau of Industry and Security (BIS) |
| Regulation | 22 CFR Parts 120–130 | 15 CFR Parts 730–774 |
| Control list | U.S. Munitions List (USML) | Commerce Control List (CCL), using Export Control Classification Numbers |
| What it covers | Defense articles, technical data, and defense services | Dual-use and commercial items, plus less sensitive military items moved off the USML |
| Foreign-made items with U.S. content | Controls generally follow the U.S.-origin article into the foreign item | De minimis rules can release foreign-made items with limited U.S. content |
ITAR is also distinct from cybersecurity requirements. DFARS 252.204-7012, NIST SP 800-171, and the Cybersecurity Maturity Model Certification (CMMC) program govern how defense contractors protect controlled unclassified information. Export-controlled technical data is often also controlled unclassified information, so programs usually have to satisfy both sets of rules.
What ITAR means for software and cloud systems
For IT and engineering leaders, ITAR mostly comes down to a question of who could gain access to technical data held in a system, and where that data sits. The practical considerations:
- Who administers the system. Vendor support staff, cloud operators, and internal administrators with access to unencrypted technical data must be U.S. persons or covered by an authorization.
- Where the data lives. Data stored on or routed through servers abroad raises export questions, which is why many programs use U.S.-located environments operated by U.S. persons.
- Encryption. Since 2020, ITAR treats sending, taking, or storing unclassified technical data as not an export when it is protected by end-to-end encryption that meets the regulation's conditions. Those include that only the originator and intended recipients can decrypt it, so the cloud provider can't, and that it isn't sent to or stored in certain proscribed countries. The conditions are specific and should be read in full.
- Remote support. Screen sharing and troubleshooting sessions can expose technical data or amount to a defense service, depending on who is on the other end.
- AI systems. Whether a model trained on technical data, or the output it generates, is itself controlled is an open question for many programs. Treat training data, model weights, and outputs as potentially controlled until your export compliance team decides otherwise.
Keeping controlled workloads on-premises or in an air-gapped deployment removes many of these questions, because access stays inside a boundary the program already controls.
There is no ITAR certification
DDTC does not certify software, cloud services, or facilities as ITAR compliant. Registration with DDTC is not a certification either. Compliance is an obligation of the organization that holds and shares the technical data, achieved through classification, access control, training, and authorizations. When a vendor describes a product as "ITAR compliant," it usually means the product supports its customers' compliance, for example by guaranteeing U.S.-person support staff and U.S. data residency. Ask exactly what is guaranteed, contractually.
This page is a general overview, not legal advice. Export classification and authorization decisions belong with your export compliance team and counsel.
Where QURE fits
Guiding hands-on defense work means handling procedures, telemetry, and records that are often export-controlled. ARES, QURE's product for defense teams, can be deployed on-premises or fully air-gapped for classified environments, so that technical data stays inside the program's own boundary and under its own access controls. It provides secure AI-guided operational procedures, encrypted multi-domain collaboration, and real-time telemetry, bringing execution intelligence to programs that cannot use commercial cloud services. Classification and authorization decisions remain with the program. To talk through your requirements, request a demo.
Frequently asked questions
Is there an ITAR certification for software or cloud services?
No. The State Department does not certify products, services, or facilities as ITAR compliant, and DDTC registration is not a certification. Compliance is the responsibility of the organization handling the technical data. Vendors that advertise ITAR compliance usually mean their offering supports customer compliance, for example through U.S.-person staffing and U.S. data residency.
Does ITAR apply to foreign nationals working in the United States?
Yes. Releasing technical data to a foreign person inside the United States is treated as an export to every country where that person holds or has held citizenship, or currently holds permanent residency. Employers need an export authorization before giving foreign-national employees or contractors access to ITAR-controlled technical data.
What is the difference between ITAR and EAR?
ITAR is administered by the State Department and controls defense articles, technical data, and defense services on the U.S. Munitions List. The EAR is administered by the Commerce Department's Bureau of Industry and Security and controls dual-use and commercial items on the Commerce Control List, along with some less sensitive military items.
Do companies that never export need to register under ITAR?
Generally, yes. U.S. companies that manufacture defense articles must register with the Directorate of Defense Trade Controls even if they never export, as must exporters and providers of defense services, with limited exceptions. Registration is a prerequisite for applying for licenses but does not itself authorize any export.
Can ITAR technical data be stored in the cloud?
It can, with care. Since 2020, unclassified technical data protected by end-to-end encryption that meets ITAR's specific conditions is not exported simply by being sent or stored. Otherwise, programs typically use U.S.-located environments administered by U.S. persons, or keep the data on-premises. Confirm the approach with your export compliance team.
Sources
Related terms: Air-gapped deployment, MRO, Digital work instructions, Remote expert assistance. Browse the full glossary, read field notes in the QURE Journal, or request a demo to see execution intelligence on your own procedures.